GODEX GE300 Thermal Label Printer User Manual

GODEX GE300 / GE330 Thermal Label Printer User Manual

GODEX GE300 / GE330 Thermal Label Printer User Manual FCC Compliance Statement for US Users This equipment has been tested and found to comply with the limits for a Class A digital device.

Pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection Against harmful interference When equipment is operated in a commercial environment this equipment generates, uses and can radiate radio frequency energy, if not installed and used.

According to the instructions, it may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at his own expense.

EMS and EMI compliance statement for European users This equipment has been tested and passed in accordance with electromagnetic requirements.

According to the standards

EN 55022: 1998 + A1: 2000 + A2: 2003, CISPR 22, Class A EN 55024: 1998 + A1: 2001 + A2: 2003, IEC 61000-4 Series EN 61000-3-2/2000 and EN 61000-3- 3 / 1995.
The machine is also tested and passed according to the European standard EN55022 for Both radioactive and carrier emissions limits GE300.

What is this ad about?

It complies with the following standards
EN55022: 1998, CLSPR 22, Class A / EN55024: 1998 / IEC 61000-4 Serial / EN61000-3-2: 2000 / EN 6100-3-3:
1995/CFR 47, Part 15/CISPR 22 3rd Edition: 1997, Class A/ANSI C63.4:2001/CNS 13438/IEC60950-1:2005
(EN 60950-1: 2006 + A11: 2009) / GB4943: 2001 / GB9254: 1998 / GB17625.1: 2003 / EN60950-1: 2001

Keep the device away from moisture.

1. Before plugging the machine into the electrical outlet, please
Check the voltage of the power supply.
2. Make sure the printer is turned off before plugging in the power connector
into the power socket.
3. It is recommended that you connect the printer to the sudden power supply
Protector to prevent possible transient overvoltage damage.
4. Be careful not to leak liquids on the device to avoid electricity
shock.
5. For safety and warranty reasons, only qualified service personnel
Equipment must be opened.
6. Do not repair or modify the powered equipment under any of them
Circumstances.